Whether it’s due to the changing political landscape or environmental regulations, manufacturers face the constant challenge of delivering high-quality products. Meeting customer expectations while navigating stringent regulations requires more than just good intentions; it demands [...]
Under Settings and Profile Settings, click Part Type Fields and add a Part Type, such as COTs, etc. This item will then be available to you as a drop-down list on the Parts List tab [...]
When you load the drawing, click Exclude and you can select as many sections of the drawing and pages you want to exclude from the processing.
Find the list here https://www.discussoftware.com/general/announcing-major-update-discus-2025-is-released/! 2025 is a Home Run!
https://www.youtube.com/watch?v=DZORg3gxbb0
Join our advanced Training class! Click to register for 24 April at 11am EDT. https://register.gotowebinar.com/register/6298235046796817751
With data in DISCUS, click Export Report using Excel and click Manage and select the option to show the full path. This is the location where your templates are stored, so you can access and [...]
The production part approval process, or PPAP, is a quality control and approval process in the manufacturing industry. Its purpose is to help ensure that parts can meet customer-specific requirements every time. However, it doesn’t [...]
Easy! Click your Results tab and at the bottom of the BoC are color icons to click for the status of the results. Easily see which results you need to enter, and which ones are [...]
With data in the Bill of Characteristics (BoC) click to export template to Excel. Click Manage Template and then click the upload function. Your template will be ready for you to use!
This template not only parses out the nominal, upper and lower tolerances, but displays the upper and lower spec limits! Contact [email protected] to get a copy of this template.
Access our Youtube video! https://www.youtube.com/watch?v=DZORg3gxbb0
In Results and Configure Fields, enter the Designed Tooling. Then in the Bill of Characteristics (BoC), select all the characteristics to have that designed tooling. Right click and select Edit Multiple Characteristics. Click the check [...]
Under Result Settings enter the Pass value and the Fail value as text. Then in the Bill of Characteristics (BoC) with the Results tab displayed, enter the value in the Results field.
Access this via Settings, Profile Settings and Detail Panel to add/remove a tab in the BoC).
Under Settings and Profile Settings, access the Class and then click to add a value, such as N/A or Safety. This will then be available for you as a drop down. You can select the [...]
Access this via Settings, Application Settings and Backup/Autosave, to increase or decrease the backups.
Right-click on the drawing and click Set Sheet Number. Enter the page you want such as 1 and that will be recorded as sheet 1 in your export.
If you have a multiple page drawing, load the drawing and indicate what pages you want processes, such as 3-6, 7 and only those pages will be processed for ballooning.
When you add the drawing, a new feature for DISCUS 2024 U1, you can click on the function to exclude areas that will not be processed. Simply drag the rectangle around any section not to [...]
